22nd May 2021, 06:30 AM
|
|
Senior Member
|
|
Join Date: Apr 2017
Location: Scarborough, North Yorkshire, England
Posts: 114
|
|
Update on Stabiliser bar bushes?
Hi Mike,
Any update on the Sport suspension bushes? Did they fit properly? Working correctly? Did you get these in UK? I’m looking for a set here in UK
Cheers,
Quote:
Originally Posted by mcs
Hi All,
I was under my car looking at the lower control arms to check if they were worn before ordering a set, and I noticed my sway bar end link bolt had completely sheared off.
This would account for the rattle I was getting.
Naturally I took the bar out and went to order a new one, but there are none in OZ and they are a fortune from Audi. My car is a sport so I have the 31mm bar.
I have learned the bushes for the bar are actually bonded to the bar and are part of it. There is seemingly no supply of these, however I have found a company here which makes them and am trying them out.
If anyone requires some, let me know and I will see if they can make more of them.
I will keep you all updated on how it goes.
Mike
|
__________________
Present cars
Daily driver: BMW e65 730d
Batmobile: 2006 S8, D3, 4E 5.2L V10 BSM with (loud) Miltek SS exhaust, Carbon Fibre trim, Alcantara headlining, soft close and keyless entry. 
|