[Prefferle]

**UPDATE**
Using VCDS looking at Measuring Blocks I found that when using Basic Settings to force the suspension to lower and lift - the front suspension would display the lifted height increased however, the rear suspension displayed the opposite! This suggested the rear level sensors linkages were being activated incorrectly. as it turns out that once I disconnected the lower linkage to the swing arm and flipped around the linkage - the sensors now read correctly when using basic settings to force lifting, and dropping. With the wheels back on I again tried Adaptation which worked perfectly!👍 all in all a positive result, so human error on the level sensors replacement… now the car sits correctly and will purchase a couple OEM grade minimum pressure valves for the struts as these can fail even after two years new. I purchase these from Miessler Automotive Parts - Germany.
hoping that my experience can help others