Quote:
Originally Posted by HPsauce
I can't recall exactly how the plugs fit but I don't expect it's easy to swap left and right.  |
Looking at the back of my old RNS-D, the block connector for the speakers has 8 female spade connectors. In theory, you 'should' be able to remove them from the connector with one of these terminal removal tools.
A bit of hassle, as there's not a lot of length to those looms, and you'll be trying to remove them, whilst the loom is pretty much still in the slot where the RNS-D sits. Then again, removing the door card to get at the speaker is no easy task either.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts
My DIY jobs -
Replaced alarm horn,
Replaced Coolant Temp sensor,
Updated RNS-D firmware,
Installed Reversing Camera and Digital TV,
Dashcam Installation,
Retrofitted Rear Blinds,
Auto-Dimming Rear View Mirror,
Chrome Boot Struts
Sold! 
2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights
My DIY jobs -
Fan Jet Windscreen Washers,
Retrofitted Electric Side Blinds