View Single Post
  #1  
Old 30th March 2011, 09:54 AM
CBA_caption CBA_caption is offline
Junior Member
 
Join Date: Feb 2009
Posts: 15
Default Parking Sensor Display Fault

Chaps and Chapesses,

I backed my car into the drive this morning and something didn't feel quite right. A moments pause and I realised that the Parking sensor display on the MMI had all sectors grey ( i.e. nothing in the way) despite the audio telling me I was about to hit our wheelie bin!

Now, I haven't changed anything recently and the parking sensor system is obviously working, just not on the screen.

When I hit 'set-up' the 1st three menus items are all titled 'Display' rather than anything useful, I think the 3rd one is to do with the rear camera (not fitted). Almost like it's corrupted software.

I'm hoping a re-boot will do the trick, but how to I re-boot the MMI short of disconnecting the battery?

Has anyone else had this issue and found a solution?

I'd be grateful of any assistance from the expertise on here.

CBA

UPDATE:

Well that was easy! For anyone else with the problem: This page http://a6retrofit.tripod.com/articles/resetmmi.html had the buttons to press and all was fine after the reset.

Last edited by CBA_caption; 30th March 2011 at 10:06 AM.
Reply With Quote