Quote:
Originally Posted by PsYcHe
Hammer & Chisel 
Nah... You need to remove the strip at the top above the glovebox. It just pops off, then a connector comes off the buttons in the middle. Start from the glovebox end pulling towards you and work along. Don't put too much strain on it as it can snap next to the buttons.
You'll then see a number of torx-headed screws, take them out, there should be two on the side behind the fuse panel cover, and I can't remember if there's any underneath or not. |
Hammer & Chisel - Tempting, as nothing is straight forward on this car...
Many thanks for the instructions!
