Well then..
Changed all the vacuum lines today and took her for a spinn. No fault as of yet.
Under Engine->Mess.blocks-> Group 3, the figures have changed
Old Vacuum:
760 rpm: 4 G/S. ----- 2.2% Load ----- Timing. apx. 12
5000 rpm. 40-50 G/S. ----- 60%. Load ----- Timing: forgot
New Vacuum Lines
760 rpm. 6-8 G/S ----- 2.7% Load ---- Timing: 10-15
5000 rpm: 180-285 G/S. ---- 97%.Load ---- Timing : Hard to read
According to Just Ben in this post under G/S should be much higher on idle
Press here
Any suggestions ?