Quote:
Originally Posted by terion
How does RNS-D/TMC talk to the color-DIS when no infotainment can is present? I know this is an RNS-D DX with turn-by-turn in DIS.
|
Quote:
Originally Posted by HPsauce
Have you read this thread from the start? 
As IT said in THE VERY FIRST POST: |
Yes, I know you loose turn-by-turn in DIS with RNS-E, but my question was about how the RNS-D with no can bus communicated with the DIS, and now I know it doesnt. So called non DX version which doesnt have TMC, DX versions require TMC, and they use can bus.
Also Xenon cars have can bus, and mine is a Xenon equipped car.
That means I have can bus, but I cant get it to talk to my RNS-E, even when the only thing connected to the instrument cluster on the green connector, pin 21 and 22 is the RNS-E.
RNS-E recoded, and VCDS tells me there is no can bus connection.
I have to wire it all up again, to see if there is about 60 ohms between can l and can h, as it should.
Still cant find my TMC module
