Torque converter clutch stuck.
I've been noticing a clunk when engaging drive or reverse. This clunk is usually preceded by a slight pause then clunk. I did a scan with VCDS and it is showing the torque converter clutch is stuck in the off position. It started doing this a couple of months ago so I had the fluid changed and cleared the codes but it made no real difference. The clunk is still there and the same fault code has come back. Is there a way of unsticking the clutch without the need for a transmission stripdown? If I go to any specialist in Dubai as sure as God made little apples they will recommend a complete rebuild.
Thanks
Steve
__________________
2001 D2 S8. Volcano black. KW Variant 1 coilovers. EBC Turbo grooved discs with Yellow Stuff pads. 19 inch R8 replica wheels with 255/35/19 Michelin Super Sport. In the UK, 1990 Audi 90 2.3 20v Quattro with just 65,000 on the clock and in mint condition.
|