View Single Post
  #26  
Old 8th May 2014, 12:26 PM
David's8's Avatar
David's8 David's8 is offline
Senior Member
 
Join Date: Jan 2012
Location: Helensburgh, Scotland
Posts: 3,524
Default

Quote:
Originally Posted by steamship View Post
I chickened out from soldering mine . The part of the loom for the fog light switches is tie wrapped at the back left. What I did was to snip the cable tie, and was able to swap the switch positions. Because I did it this way, I also moved the ESP switch as well.

As Davis'8 and notorious said, the trim is easily removed, as described by them.
I am not sure if the loom is the same on your 3.7 as the cables for the two fog light switches are taped into the main bundle and despite cutting a cable tie holding the main bundle to a frame deeper in the dash (in order to pull out the bundle as far as possible to work on) there was never a chance that the cables for the switches could be pulled across to the far side.
__________________
2002 D2 S8 – Ming Blue, Valcona leather, Vavona wood insert, solar sunroof (to be fitted), Heated rear seats, extended leather pack, 18” Avus, ski hatch, Bose, auto dim rear view mirror, rear blind.
Reply With Quote