View Single Post
  #7  
Old 28th September 2014, 08:38 PM
Lyons Lyons is offline
Senior Member
 
Join Date: Jan 2014
Posts: 312
Default

Some developments!

I removed the engine cover to see if anything obvious had come off and noticed the connector on the turbo was loose. When I first had the car in with Audi for a once over they said the connector on the turbo side was broken.

Today it was loose and there appeared to be a bit of melted plastic round the clips. I cleared the plastic away and cable tied the connector on. Started the car and the glow plug light had gone off. Took it for a spin and limp mode had gone and the turbo was working. Engine light remained but perhaps it's because a fault was logged?

I had a good look at the turbo and from what I can see the half with the electrical connection appears to seperate from the rest of the unit. It has a different part number too.

Is it possible to replace just the electrical bit? I'd rather get this sorted and not have a temporary fix with cable ties!
Reply With Quote