Stripped the door cards down to fit new window switches and had a look at the soft close.
Unplugging and plugging the units in causes them to kick in to life and do what they are meant to for one turn but they don't do it when connected.
Plug them in they spin in, pulling the door in, then spin out to release the cable.
But when connected to the door and simulating the door half catching they do nothing.
Even when opening they dont spin but they work when plugged in.
So is it not receiving a signal to say then door is open from a pin switch or a control unit?
__________________
[center]
06 3.0TDI Quattro:
Options:
Soft close Doors & Boot, Electric Blinds, Keyless Entry & Start, Bluetooth HandFree, Quad Zone Climate, APS+, 3 Spoke Sports Tiptronic Multi Function Steering Wheel, Heated Seats All Round, Black Leather Comfort Seats, AMI, Sunroof, Drivers & Passenger Electric Memory Seats, Auto Dimming Mirrors, Bi-Xenons AFS2, Dab, Digital TV, Reversing Camera, AV Inputs, Fridge, Solar Roof, TPMS, facelift rear lights, 3G, remote boot closure, Tow Bar.
|