View Single Post
  #1  
Old 24th January 2015, 04:48 PM
gti69 gti69 is offline
Member
 
Join Date: Sep 2013
Location: Glasgow UK / Poland
Posts: 45
Default Shaking engine, car stalls - error codes

Hi guys.

Yesterday my A8 would not start, basically after turning the key nothing would happen. I had similar issue before but back then after a couple of minutes it would start no problem.

Today I got to the car with a charged up battery as I though maybe the voltage is too low, had some problems with alarm turning on randomly so I though the battery went flat a bit. Before hooking up the replacement battery I tried starting the car again and it started no problem. Jumped in and wanted to drive away but the engine started shaking and the revs started to go down until the engine stalled. Started it again no problem, kept the foot on high revs for a few seconds but it started shaking and dying again. After a couple of tries, now after starting it just shakes and would stall in 10-15 seconds.

Hooked it up to vag com and the below is the list of engine codes. Any idea what it might be? Seems like it is one side of the V8 engine. Your help would be much appreciated.

Control Module Part Number: 4D0 907 557 J
Component and/or Version: 4,2L V8/4V MOTR AT D01
Software Coding: 04263
Work Shop Code: WSC 00000
5 Faults Found:
17740 - Knock-Control: Cylinder 8: Regulation Limit Exceeded
P1332 - 35-10 - - - Intermittent
17739 - Knock-Control: Cylinder 7: Regulation Limit Exceeded
P1331 - 35-10 - - - Intermittent
16500 - Engine Coolant Temp. Sensor (G62): Implausible Signal
P0116 - 35-10 - - - Intermittent
17737 - Knock-Control: Cylinder 5: Regulation Limit Exceeded
P1329 - 35-10 - - - Intermittent
17738 - Knock-Control: Cylinder 6: Regulation Limit Exceeded
P1330 - 35-10 - - - Intermittent

Thanks.

Tom
__________________
Tom
VW SCIROCCO GT2 '92 |150BHP -LHD
VW SCIROCCO GTX '84 |150BHP -RHD
VW SCIROCCO MK1 '78 | ??BHP -LHD
PORSCHE 924 '81
PORSCHE 944 '84
Audi A8 4.2 Quattro PF
Reply With Quote