Level control module 34 in vcds
Run output tests go through them in order and when you see accumulator test pay attention to the max pressure.
When I ran mine I saw around 10-11 bar.
Max pressure for the conpressor is 16 bar
I also ran a log file of the pressure sensor and selected the various settings in the mmi and saw as high as 12 bar on the log.
But if you don't know how to log various settings stick with the output tests it's quick and dirty, each test is consecutive so stick with it until you see accumulator test, by the sounds of it, it will most likely fail.
I would order Bagpipeandys ring set so you can rebuild your conpressor.
__________________
Del
|