View Single Post
  #7  
Old 27th May 2015, 01:13 PM
oldnick oldnick is offline
Senior Member
 
Join Date: Aug 2012
Location: france ,southampton
Posts: 551
Default

Quote:
Originally Posted by Dezzy View Post
PF is all one, however it is a separate part when manufactured. Its sort of pastic welded by melting the tabs on the inside. It could be removed but not as simple as unclipping / bolting.
thanks , solves the mystery !
I have been looking at other PF ad's and it looks like a separate part , but as it is welded on the bumper is only sold as an assembly !

no doubt you could separate it , but how then to fix it on ? could the later fixings be used ?

since posting , I decided to get out and get under , the top and bottom parts on mine have matching flanges and are held together with plastic plugs through pre molded holes ; does the PF have those flanges ? and are they completely welded together or easier to separate ; if the flanges are the same why on earth were the bit welded together ? couldn't see any tabs to be welded

Last edited by oldnick; 27th May 2015 at 01:45 PM.
Reply With Quote