|
|
|||||||
| D3 - Engine Bay Everything under the bonnet |
 |
|
|
Thread Tools | Display Modes |
|
#1
23rd July 2015, 10:35 AM
|
|||
|
|||
help needed please 90 degree bleed nipple
Hi Guys
Yesterday my cooling system through a wobbly.. The 90 degree bend with a bleed nibble on for the cooling snapped. And Audi say the part dose not exist at all... dispite this part being on every D3 I've had W12 and other wise... I can only discribed it as the plastic joint that goes through the engine firewall and joins on to the matrix piping side of things ... Has any one ever had to replace this .. A. I don't know what it's called to search for it .. B. Audi say it doesn't exist ... as do tps and other motor factors .. Any help would be greatly appreciated 
|
|
#2
23rd July 2015, 10:46 AM
|
|||
|
|||
Think I have found it on ETKA, however there is no part number. Hazarding a guess maybe they come with one of the pipes they are connected to. Etka shows them attached to these hoses. One of these is the inlet (672) and the other the outlet (674).
4E2 819 672 or 672A depending on engine, or 4E2 819 674 or 674A depending on engine. Etka Drawing ID is 261-031
__________________
Manny 2004 A4 1.8T Sport Cabriolet, 89K Miles Past 2004 D3 A8 3.7 Quattro, Xenon, Bose, Blinds, Solar Sunroof, TV, ACC, phone and almost every option. 168K miles rising slowly with retrofit AMI and DVB-T in place of Analogue 2003 Volvo S60 D5 SE Manual, 197K miles. 2001 D2 A8 3.7 QS, Bi-Xenon, Bose, Blinds, Electric Everything, retrofitted RNS-D, 191K Miles Last edited by mannyo; 23rd July 2015 at 10:50 AM.
|
|
#3
23rd July 2015, 11:25 AM
|
|||
|
|||
 This is what the suckered looks like Thanks very much for your speedy reply
|
|
#4
23rd July 2015, 01:12 PM
|
|||
|
|||
|
Ordered thanks manny
|
|
|
|
Linear Mode
