![]() |
|
D3 - Interior Electrics Airbags, Sensors, climate modules, instrument clusters, switches etc |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hi all,
I have a front passenger seat from a D3 A8 in my office/games room as part of my racing simulator. I would love to be able to wire it up so I can adjust the seat to a more comfortable position. I have a computer PSU that can provide upwards of 40A but wiring has never been my strong point and I'm a little stuck as to how to wire PSU to seat to provide the power I need. Is anyone able to provide some guidance on how I can power my A8 D3 passenger seat? Thanks David |
#2
|
||||
|
||||
![]()
Are the seat control buttons on the side of the seat?
If so you just need a 12v dc live and neutral to power the seat
__________________
Daily drive: 2016 Infiniti QX70.....a car that's even more complicated than my last Infiniti FX to modify ![]() Current 'Project': VW Crafter CR50 4 berth camper van Previous 'Projects': 2006 Subaru Legacy Spec 'B' 3.0R, 1994 Ex-MOD Land Rover Defender, now "civilianised". 2000 Audi S8 FL www.whall.co.uk |
#3
|
|||
|
|||
![]()
Be careful with the wires at that 12V, not sure if the D3 has airbags within the seat itself but connect the wrong wires and you could get a big surprise.
__________________
Manny 2004 A4 1.8T Sport Cabriolet, 89K Miles Past 2004 D3 A8 3.7 Quattro, Xenon, Bose, Blinds, Solar Sunroof, TV, ACC, phone and almost every option. 168K miles rising slowly with retrofit AMI and DVB-T in place of Analogue 2003 Volvo S60 D5 SE Manual, 197K miles. 2001 D2 A8 3.7 QS, Bi-Xenon, Bose, Blinds, Electric Everything, retrofitted RNS-D, 191K Miles |
![]() |
|
|