![]() |
|
D2 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Well got my air suspension all hocked up yesterday, but im not fully satisfied with how low it got in the front. So im looking for some shocks with a shorter tube. Does anyone know of where to get that?
Last edited by Exerqtor; 28th October 2012 at 12:06 PM. |
#2
|
|||
|
|||
![]()
You may find that the issue isn't shock length but rather that the control arms lay on the strut tower and that it therefore needs some drilling done with a hole saw.
|
#3
|
|||
|
|||
![]()
So you have encountered that problem on your 8 as well? Didn't look like that was the problem in my case tho.
|
#4
|
|||
|
|||
![]()
Yeah, I ran into that. B6/B7 4s have the issue as well. I thought it was shock length but it was not.
If it is shock length another option is to have the bottom mount shortened like this guy did http://forums.quattroworld.com/a8/msgs/36807.phtml Another example from soeone using UAS bags: ![]() So long as the welds are good you'll be fine with this. |
#5
|
|||
|
|||
![]()
Ah ok, im going to shorten the peg in the bottom of the shock like the pic you attached and look how it goes.
Im running Universal Air Suspension bags on mine, which are doing on yours? |
#6
|
||||
|
||||
![]() Quote:
__________________
1996 A8 4.2 QS. Bose, Solar roof, um...um... rally sport towbar. Now gone to a new home as the Traders 8. Bright yellow bus o love. |
#7
|
|||
|
|||
![]()
Haha my tought exactly, going to chop up the shocks tomorrow. Gonna try taking some pic's
![]() |
#8
|
|||
|
|||
![]() ![]() Here's what mine ended up looking like. |
#9
|
|||
|
|||
![]()
Ok, looks like pretty much the same. What brand are those front bags/shocks?
|
![]() |
|
|