A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D3 > D3 - Interior Electrics

D3 - Interior Electrics Airbags, Sensors, climate modules, instrument clusters, switches etc

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12th February 2014, 05:21 PM
snapdragon snapdragon is offline
Senior Member
 
Join Date: Nov 2011
Posts: 1,669
Default Headlight Symbol Illumination LEDs

I just replaced the second LED in my headlight switch.
The green sidelight on one blew 2 years ago, yesterday the orange Auto one blew. I was able to desolder the old ones and put in some new ones that were slightly smaller, but a good replacement.

Remove the switch by turning knob to 0 then pushing the knob in 1cm and turning to first position, this should cause side pins to withdraw and then it cab be pulled out. You can then unclip with fingernail or similar in the end edge of the connector.

3 screws remove the back of the switch and the PCB lifts out and the LEDs are on the other side.
The orange Auto one is bigger, I had a small one and it is not quite so bright.
It's still OK though.

The parts to search ebay etc.. for are "yellow 0603 led" "yellow 0402 led" or whatever colour. The number refers to the size in mm, not sure if 0603 is better, I used 0402 and they were a little small.

Last edited by snapdragon; 23rd April 2020 at 08:19 AM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:59 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.