![]() |
|
D2 - Transmission Gearboxes, diffs, drive shafts. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
After reading the sticky regarding cv seals final drive seals and so on i figured i should order some of the mentioned tools:
-Harmonic balancer puller -Weighted slide handle seal puller The Harmonic balance puller is to be found on Ebay but does it matter if the bolts in the kit is in " and not mm? will the below be usable for the 8? Will this do? The weighted side handle seal puller i could not find. Might be called something else on the web? As always any help is very appreciated. ![]() Jan
__________________
2003 Daytona Grey RS6 2000 Silver S8 2005 A6 1.8TQ Premium 1993 Audi S4 2.2 TQ MTM 330 (my first love!) |
#2
|
||||
|
||||
![]()
I think the tool you are talking about is a slide hammer used for pulling bearing and dents etc.
something like this http://www.ebay.com/itm/16pc-Profess...item4d14268142 http://www.ebay.com/itm/17pc-Axle-Wh...f51d1b&vxp=mtr
__________________
Del ![]() |
![]() |
|
|