Beeeeeep

Norretal · #1 11th October 2015, 06:39 PM

Not sure if I'm posting in the correct place, but here goes....

Can't find anything else relating to the same issue on here so I'm asking for guidance. Since yesterday I've had a warning when putting the car into reverse, the continuous beep and asking if it's safe for me to reverse. The only thing I did was wash the car yesterday and the fault arrived just after. So, is it a failed sensor and is the only option to replace it? I'd obviously be happier if it's a common thing and there's a cheap, easy fix

Delboy · #2 11th October 2015, 06:50 PM

Could be just water in the connector, do you know which ones not responding

Norretal · #3 11th October 2015, 07:01 PM

I don't have VCDS Del but I can get it scanned if that's what is needed. It's not really a problem, just more of an annoyance, I'd like to understand and fix it

Delboy · #4 11th October 2015, 07:44 PM

Is it something your going to tackle yourself, the bumper can be a right pain in the behind to get off.

You may be able to determine which one is out by listening to them when reverse is engaged.

47p2 · #5 11th October 2015, 10:11 PM

Did you use a power wash to clean the car?

Norretal · #6 12th October 2015, 08:18 AM

Quote:

Originally Posted by 47p2

Did you use a power wash to clean the car?

Yes I did, but lightly just to rinse as it wasn't really dirty, is that a known cause?