|
|
|||||||
| D3 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc. |
 |
|
|
Thread Tools
|
Display Modes
|
|
|
|
#1
24th May 2016, 04:38 PM
|
||||
|
||||
Found this interesting
For those of us that have the ceramic brakes, you may find the following a interesting read
http://www.golfmkv.com/forums/showth...137174&page=56
__________________
Del 
|
|
#2
24th May 2016, 05:16 PM
|
|||
|
|||
|
So the Audi 6 pot 'ceramics' are Brembo 19z, which were also available on Porsche. Therefore surely regular pads for steel discs must be available to fit that caliper. Just need to find a 380mm steel disc with the correct offset for when the time comes to replace the ceramics to steels and keep the existing 6 pot caliper.
__________________
Matt 2004 A8 3.7q, 1998 A4 2.8q, 1994 Coupe 2.8q SORN,
|
|
#4
24th May 2016, 07:35 PM
|
|||
|
|||
|
Just search the Brembo Gran Turismo Brake System Application List and they do a 380mm x 34 drilled. Part number 101.9003A
It's a two piece kit, but the original center bell from the ceramics could be used again for the correct offset for the D3 S8 As for the rears, just get W12 calliper carriers, W12 discs and regular pads. 
__________________
Matt 2004 A8 3.7q, 1998 A4 2.8q, 1994 Coupe 2.8q SORN,
|
|
#5
24th May 2016, 08:51 PM
|
||||
|
||||
|
Nice find, i see they also do other discs in the same size, not sure if the bells would match up though.
Came accross these too http://www.ebay.de/itm/KERAMIK-CERAM...3D221416755325
__________________
Del
|
|
#6
24th May 2016, 08:58 PM
|
|||
|
|||
|
That's an even better find, a complete plug and play kit.
__________________
Matt 2004 A8 3.7q, 1998 A4 2.8q, 1994 Coupe 2.8q SORN,
|
|
|
|
mattylondon 
Hybrid Mode
