Number plate bulb holder screws

[NOR_KNet]

I have the same problems as you guys. 2 screws broken and stuck in there.

I had an identical problem with broken off head of the license plate screw.

So i drilled out the nut that is pressed on to the body and bought some rubber nuts and installed those instead.



Now, if the screws get stuck again i can just drill of the head, remove the whole rubber nut and replace with a new one with no problem.

Im thinking of doing this to the glass from the license plate light.

Just drill out a bigger hole for the rubber nut and install with new screw

PS! Its a little more work but sounds easy though.