What's in the workshop? A 3D printer! - A8 Parts Forum

A8 Parts Forum

		A8 Parts Forum > General Natter > Daily banter
What's in the workshop? A 3D printer!

Daily banter For everything, and anything that doesnt fit in elsewhere

PaperClip

MikkiJayne What's in the workshop? A 3D... 1st November 2018, 08:24 PM

PaperClip

MikkiJayne Once I'd got the printer... 1st November 2018, 08:38 PM

PaperClip

MikkiJayne Made some parts to fill in... 1st November 2018, 09:00 PM

steamship What size of items can these... 1st November 2018, 11:06 PM

MikkiJayne I've been doing that on... 2nd November 2018, 07:41 AM

moltuae Cool +++ So do you have... 2nd November 2018, 08:40 AM

PaperClip

MikkiJayne I don't have a scanner yet,... 2nd November 2018, 09:22 AM

Regulus Very cool stuff MJ +++ ... 2nd November 2018, 06:25 PM

MikkiJayne Those are on the list +++ 2nd November 2018, 06:26 PM

HPsauce So to fit that you have to... 2nd November 2018, 06:49 PM

MikkiJayne The bar comes off with four... 2nd November 2018, 06:55 PM

tc4332 I really like the sideways... 2nd November 2018, 10:06 PM

PaperClip

Architex_mA8tey In the D3 I've combined the... 3rd November 2018, 07:20 AM

PaperClip

Zip This is what the aluminium... 3rd November 2018, 09:45 AM

MikkiJayne Ah thank you :) I couldn't... 3rd November 2018, 09:55 AM

PaperClip

Zip You can see it has a lip... 3rd November 2018, 10:24 AM

MikkiJayne Interesting. Almost exactly... 3rd November 2018, 10:41 AM

awolfinsheepsclothes Another great thread, i have... 3rd November 2018, 04:04 PM

Ameiseuk Nor me! I've watched some... 4th November 2018, 06:11 AM

HPsauce Thought it looked like a... 4th November 2018, 09:59 PM

27litres When you've sorted the... 6th November 2018, 03:28 AM

PaperClip

MikkiJayne I've been making parts for... 18th November 2018, 06:36 PM

steamship You make it all sound so... 18th November 2018, 06:56 PM

MikkiJayne It was about four hours from... 18th November 2018, 08:16 PM

awolfinsheepsclothes I didn't understand a word of... 18th November 2018, 08:35 PM

tc4332 It is English . . .well sort... 18th November 2018, 08:40 PM

awolfinsheepsclothes I still don’t understand but... 19th November 2018, 09:34 AM

Dezzy Depending on what version of... 26th November 2018, 02:07 PM

MikkiJayne Fusion 360 can import an... 26th November 2018, 02:16 PM

PsYcHe My oldest is doing a product... 27th November 2018, 01:45 PM

RS6 MikkiJayne this is amazing!!... 27th November 2018, 09:11 PM

steamship There is such a 3D plan for... 27th November 2018, 10:30 PM

HPsauce The knob itself is pretty... 28th November 2018, 06:44 AM

MikkiJayne It shouldn't be too hard to... 28th November 2018, 09:02 AM

tintin I agree about wanting to get... 28th November 2018, 09:31 AM

MikkiJayne Paint and / or plastidip type... 28th November 2018, 10:55 AM

briang9 I was just fumbling with Mr... 29th November 2018, 09:13 PM

RS6 yeah deffo be up for one... 28th November 2018, 06:05 PM

RS6 i remember you posting this!... 28th November 2018, 06:02 PM

steamship It may take me a while... 28th November 2018, 11:46 PM

27litres Not this one is it?... 29th November 2018, 02:06 AM

27litres I've got something useful for... 29th November 2018, 02:13 AM

steamship That is indeed the culprit!... 29th November 2018, 05:10 AM

MikkiJayne I can print one in wood if... 29th November 2018, 05:27 PM

PaperClip

MikkiJayne Didn't like the knopf so I... 29th November 2018, 06:24 PM

PaperClip

MikkiJayne http://forum.a8parts.co.uk/att... 29th November 2018, 06:46 PM

PaperClip

MikkiJayne Made a tapered version which... 29th November 2018, 07:30 PM

MikkiJayne Side note: this stuff is... 29th November 2018, 07:35 PM

PaperClip

MikkiJayne Too much? ... 29th November 2018, 07:57 PM

steamship I just tied down the car... 29th November 2018, 08:00 PM

PaperClip

MikkiJayne I did a quick render of what... 29th November 2018, 08:36 PM

RS6 This is perfect really nice... 30th November 2018, 09:27 PM

PaperClip

MikkiJayne I printed a couple of the... 1st December 2018, 05:29 PM

PaperClip

MikkiJayne Printed a couple more. I... 1st December 2018, 08:02 PM

tc4332 Nice one MJ. Craig has... 1st December 2018, 08:29 PM

MikkiJayne You've got flexible filament... 1st December 2018, 08:34 PM

HPsauce I'm thinking colour matched... 1st December 2018, 09:11 PM

MikkiJayne Lots of colours, but all... 1st December 2018, 09:21 PM

HPsauce Surely you need a red one? ;) 1st December 2018, 09:23 PM

MikkiJayne Well obviously :D I just... 1st December 2018, 09:25 PM

tc4332 Apologies MJ, I did not word... 1st December 2018, 10:32 PM

steamship Looking at these kits at the... 2nd December 2018, 03:05 AM

MikkiJayne Thanks for the link. I... 2nd December 2018, 08:33 AM

steamship Maybe not in the automotive... 2nd December 2018, 10:20 AM

tc4332 I realise not cost effective... 3rd December 2018, 08:29 PM

RS6 can i get one of these in my... 4th December 2018, 07:04 PM

Conan_the_Librarian If you want to go to the shop... 5th December 2018, 06:47 PM

funkmiester Good work with the printer.... 7th December 2018, 09:51 PM

MikkiJayne That's pretty cool +++ ... 7th December 2018, 10:54 PM

HPsauce I imagine you'd take a... 8th December 2018, 08:01 AM

Markiii How goes the brake brace? 8th December 2018, 08:23 AM

MikkiJayne It needs to be redesigned so... 8th December 2018, 08:43 AM

tc4332 MJ We have started to use a... 22nd December 2018, 12:54 PM

MikkiJayne Steadytech... 22nd December 2018, 02:11 PM

More replies below current depth...

RS6 How did you know!? :ROFL: 7th December 2018, 10:31 PM

PaperClip

MikkiJayne Next job with the brace was... 2nd November 2018, 06:52 PM

PeterHill Oh, this is very cool, not... 23rd December 2018, 07:48 PM

PaperClip

MikkiJayne Ok the brake master cylinder... 2nd November 2018, 06:25 PM

Prev

Previous Post

Next Post

Next

#30

Old

7th December 2018, 10:54 PM

MikkiJayne MikkiJayne is offline

MikkiJayne is offline

Senior Member

Join Date: Jan 2012

Posts: 5,017

Default

Quote:

Originally Posted by funkmiester

View Post

I did spend 15 years in the plastics packaging industry and have a degree in material science and was the first person in the UK to extrude PLA on an industrial scale

That's pretty cool

What do you want for the Delta? I've been looking at the Kossel-based machines on ebay just as a curiosity. I don't really need another machine that big (the CR-10S is 300x300x400) but it'd be interesting to have a play with one. I'm planning to build a Prusa i3 clone with direct-coupled extruder next, and then a Hypercube of some description. Addi(c)tive manufacturing

I was going to try a Kinect for scanning too, but having drawn the footrest in Fusion360 I'm inclined to just try drawing a foglight grille as well. How hard can it be?

Reply With Quote

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT. The time now is 11:44 AM.