|
|
|||||||
| Daily banter For everything, and anything that doesnt fit in elsewhere |
|
|
Thread Tools | Display Modes |
|
#34
18th January 2019, 09:10 AM
|
|||
|
|||
MJ - printer nozzle scratch/gouge.
I levelled the bed and printed something off with no issues, then once cooled removed from the bed then started on the next items but it kept on buggering up. The filament not sticking. So redid the file to only have the one item, started to print again and every now and again could hear a click. after 40 seconds or so realised the print head was diging into the plate - gave it a clean (as can be seen by the residue of the acetone) but now damaged...... Ray - good work with the build of the modules 
__________________
Andy. Current cars: BMW i4 M-Sport Peugeot 207 (the sons) Triumph Daytona 675 (2017 reg) =========================== Gone but not forgotten Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023) 1972 T2 Bay Window Camper (Slow) Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre 2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member) 2000 A8 FL QS 4.2 (with RNS-E - Nice ) (Engine poorly so sold on to be brought back by someone who has the time)
|
|
|
Threaded Mode