![]() |
|
D2 - Transmission Gearboxes, diffs, drive shafts. |
|
Thread Tools
![]() |
Display Modes
![]() |
|
#1
|
|||
|
|||
![]()
Hello, this is my first post and I want to introduce you to my project. Namely A8 4.2 40V manual conversion. Cost me a four months, to get all parts and finish it. For now I have changed console pedals
![]() ![]() I put my hand on the ![]() The box itself chose FTL 01E 3.889 ratio (from A6 2.5TDI) ![]() with the rear differential(from automatic A8 3.7). Lengthened and balanced propshaft. Front axles from a manual transmission to the A8. Modified flywheel from 3b engine, Clutch and disc from S4. As I changed all the seals. And I did a full rebiuld engine. ![]() Custom 3b flywheel. Developed from myself. ![]() ![]() ![]() ![]() Some problem's parts is healed... ![]() This small pipe is from block to oil cooler. How look insine ![]() ![]() ![]() ![]() 2000rpm = 120km/h (speedometer is calibrated by gps) ![]() Some pictures from inside ![]() ![]() Last edited by nakata; 13th April 2014 at 03:05 PM. Reason: Embed photos |
|
|