|
|
|||||||
| D2 - Body and Exterior Bumpers, bonnets, glass, trims - Everything outside |
|
|
Thread Tools
|
Display Modes
|
|
|
|
#1
3rd February 2013, 12:40 PM
|
||||
|
||||
MOD: Plastic caps for wing bolts
If you want to cover wing bolts under your bonnet you can do so with black plastic caps part number 'N 036 321 2' -- they cost pennies.
You may need to do so for the following reasons: * you want to have a bit more sophisticated look. * your wing bolts are rusty. * you changed those bolts for brand new ones and they are unpainted. * you had to loosen those bolts and then tighten them again to adjust wing position for a finer gap between bonnet and the wing (yes, wing is adjustable). This may damage paint on those bolts. Two pictures:
__________________
I'd rather drive on left Last edited by notorious; 3rd February 2013 at 02:03 PM. 
|
|
|
notorious 
Threaded Mode