A8 Parts Forum  

Go Back   A8 Parts Forum > General Motoring > VCDS (aka Vagcom)

VCDS (aka Vagcom) For all your electronic debug / diag advice queries and mods.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 9th September 2009, 10:05 AM
ulfilias ulfilias is offline
Senior Member
 
Join Date: Apr 2009
Location: Peterborough, Cambs, UK
Posts: 962
Default Fault bits

Hi Guys,

I've finaly after a load of messing about got one of the dodgy cables to play ball with 3.11 - Old but hopefuly it'll give me an idea of how much use/worth there is in things.

I've scanned, then cleared, then run arround a bit and scanned again and been left with :

17927 - Camshaft Adjustment: Bank 1: Malfunction
P1519 - 35-00 - -
17549 - Load Calculation Cross Check: Implausible Value
P1141 - 35-10 - - - Intermittent
17539 - Oxygen (Lambda) Sensor: B2 S1: Internal Resistance too High
P1131 - 35-10 - - - Intermittent

I've had a Engine check light since i bought it and was told that it was due to the LPG installation and nothing to worry about....However i'm always sceptical.

Anyone explain the above ??? - Is it worth getting that Lambda sensor replaced (they are on the exhaust i belive as with ramps probably not a big job ?)

Ta,
Lee
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:59 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.