|
|
|||||||
| D3 - Engine Bay Everything under the bonnet |
|
|
Thread Tools | Display Modes |
|
#1
29th July 2014, 03:38 PM
|
|||
|
|||
Yet another problem, lumpy running and CEL
My D3 3.7 has literally just started running lumpy and the CEL starts flashing.
Quick VCDS Scan below. uesday,29,July,2014,16:20:07:10074 VCDS Version: Release 10.6.4 Address 01: Engine Labels: None Control Module Part Number: 4E0 910 560 H HW: 4E0 907 560 Component and/or Version: 3.7L V8/5V A 0020 Software Coding: 0011773 2 Faults Found: 16684 - Random/Multiple Cylinder Misfire Detected P0300 - 001 - Upper Limit Exceeded 16688 - Cylinder 4: Misfire Detected P0304 - 001 - Upper Limit Exceeded Readiness: 0000 0000 I cleared the faults and started the car again, same errors recurred on the same cylinder number 4. Suspect coilpack I guess, question is which is cylinder 4 (assume standing in front of car).
__________________
Manny 2004 A4 1.8T Sport Cabriolet, 89K Miles Past 2004 D3 A8 3.7 Quattro, Xenon, Bose, Blinds, Solar Sunroof, TV, ACC, phone and almost every option. 168K miles rising slowly with retrofit AMI and DVB-T in place of Analogue 2003 Volvo S60 D5 SE Manual, 197K miles. 2001 D2 A8 3.7 QS, Bi-Xenon, Bose, Blinds, Electric Everything, retrofitted RNS-D, 191K Miles 
|
|
|
Threaded Mode