|
|
|||||||
| D2 - Engine Bay Everything under the bonnet |
|
|
Thread Tools
|
Display Modes
|
|
|
|
#1
28th August 2014, 07:26 PM
|
|||
|
|||
Help - Oil Cooler re-installation
Some of you may have read my Leak thread and it looked like it could be the little oil cooler pipe from engine block to the oil cooler.
To cut a long story short, got the cooler off and now need to get it back on. But, having spent 3 hours today trying and failing, I am seeing if any one has any tips or tricks (I think the best way would be to remove the nearside engine mount but don't fancy that)? Help will be appreciated!!
__________________
Andy. Current cars: BMW i4 M-Sport Peugeot 207 (the sons) Triumph Daytona 675 (2017 reg) =========================== Gone but not forgotten Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023) 1972 T2 Bay Window Camper (Slow) Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre 2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member) 2000 A8 FL QS 4.2 (with RNS-E - Nice  ) (Engine poorly so sold on to be brought back by someone who has the time)
|
|
|
Threaded Mode