That's the tool, the Audi number off my one is: T40005. Note though that although this tool LOOKS like the one for the 30v V6 it is different as the V8 is wider.... Must be correct tool. You also need Tool: 3424 the crank locking tool that screws into the block while setting belt.
The belt is pre tensioned with a torque wrench whilst tightenening the cam pulleys too - this is important to asure the belt tensioner can vary itself correctly as the engine temp alters.
They MUST follow ELSA to the letter..... Then it'll run like a dream.
|
27th January 2010, 07:13 AM
Threaded Mode