|
VCDS (aka Vagcom) For all your electronic debug / diag advice queries and mods. |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
It's good on modules and fault codes and have a nice interface there, however while It can certainly do coding, but it's enter a channel, enter a number!
I plugged my vagcom in to look at working out what relevant settings would be, and tried a couple of net searches to look up info, but I couldn't seem to work it out?!?! Mines an 2005 with Bi-Xenon's. Going into 55 Headlamp Range, all i could fine was settings for leveling, codes to say what sort of light you have etc. Adaption (10 which is confusing) doesn't have a channel 10 on mine, so it's not that So i haven't been able to test this! Lee |
#12
|
|||
|
|||
Thanks for trying
__________________
Owner of a 2008 A8 3.0tdi SE |
#13
|
|||
|
|||
I now have my obdeleven so will try doing this at the weekend, Any ideas where to start ?
__________________
Owner of a 2008 A8 3.0tdi SE |
#14
|
|||
|
|||
Going to Belgium this weekend, has anyone managed to do this and has any tips ?
__________________
Owner of a 2008 A8 3.0tdi SE |
Thread Tools | |
Display Modes | |
|
|