Wanted S8 / S6 40V Pistons

SyncroS8 · #1 25th October 2013, 06:23 AM

I haven't seen it but I'll check it the block later on today for you.

MG

richyb66 · #2 25th October 2013, 07:23 AM

Thanks for that.

Also, there's 2 different pistons in the 40v as they're specific to each bank. From memory, I think you need bank 2 pistons (cylinders 5 to 8)?

SyncroS8 · #3 25th October 2013, 07:54 AM

No problem

Yes I'd figured out due to the offset design but thanks for confirming it for me.

MG

SyncroS8 · #4 25th October 2013, 09:33 AM

Just checked in the block.. a threaded hole with no plug and no pin. Sorry.

I now have to find a blanking plug too!

MG

richyb66 · #5 25th October 2013, 10:51 AM

Ok, thanks for looking anyway. I've got a cam locking bar and no locking pin!!

SyncroS8 · #6 25th October 2013, 11:20 AM

Quote:

Originally Posted by richyb66

Ok, thanks for looking anyway. I've got a cam locking bar and no locking pin!!

Ah, I bought one recently as I bought a cam locking tool from Germany.

They're cheap enough...

eBay Crank Locking Pin

MG

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode