![]() |
|
D2 - Lights Headlights, xenons, foglights. Everything outside the car that glows |
![]() |
|
Thread Tools
![]() |
Display Modes
![]() |
|
#1
|
||||
|
||||
![]()
Didn't they suggest what is was superseded with?
Not sure if generic wire will work.
__________________
I'd rather drive on left Last edited by notorious; 28th May 2017 at 09:46 PM. |
#2
|
||||
|
||||
![]()
No, the guy at TPS said it's just not available anymore.
I might try another Audi dealer and see if they can suggest an alternative.
__________________
2002 S8 - Irish Green Pearl. Cat N (saved by the D2 Doctor ![]() 1988 E30 Coupe - Royalblau Metallic 2003 S4 Avant - Light Silver Mettalic 2016 S5 Coupe Black Edition - Glacier White |
#3
|
||||
|
||||
![]()
I've managed to get these wired in with new LED bulbs but I'm getting "bulb out" errors when I apply the brake so suspect I have them wired incorrectly. I've removed them for now and everything is fine again.
Notorious, when you get moment would you mind telling me, or showing me exactly how you have yours connected as it's difficult to make out from the picture above. Have you spliced them in?
__________________
2002 S8 - Irish Green Pearl. Cat N (saved by the D2 Doctor ![]() 1988 E30 Coupe - Royalblau Metallic 2003 S4 Avant - Light Silver Mettalic 2016 S5 Coupe Black Edition - Glacier White |
#4
|
||||
|
||||
![]()
Each wire will have two pre-spliced connectors. One at each end. One end goes to bulb's connector and the other to additional reserved connectors under the black cover.
Extremely simple.
__________________
I'd rather drive on left |
![]() |
|
|