|
D3 - Common Faults Quick links to all known common faults and their solutions |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Just done the sensor gel pad today was a 10min job at best, you can buy them online. Worth a try first as a few pounds to see if it fixes it. You've just got to remove the cover unclip clean off the old gel pad from the sensor and windscreen fit the new pad to the sensor and put back in place I think the gel pad cooks over time as when i took it off was like jelly.
|
#12
|
|||
|
|||
Quote:
|
#13
|
|||
|
|||
I got fed up of trying to find the audi part number when looking so got it from here:
https://m.aliexpress.com/item/100500...37fef19c9MXLYz |
#14
|
||||
|
||||
4E0971067A
That is the solenoid bypass. However, in my case the mounts are now 250,000klms old and they will have compressed. They will need replacing. Usually if you have a cracked torque support mount, the engine mounts have compressed to allow to much play. Mike
__________________
04 A8 - 4.2 Sport Indigo Leather Sports Seats - Sports wheel - Sports Air Suspension Auto Boot - Double Glazing - AMI - Solar roof TV - Bose - Voice Control - TPMS - AFS- TINT Power Blind, Fingerprint - Light package (in and out) Retrofits: OEM Auto headlights & rain sensing wipers OEM Bluetooth phone Bluetooth Audio Streaming Reverse Camera OEM Aluminium Package Auto boot close using remote/door button |
#15
|
|||
|
|||
Received new gel pad and still no luck unfortunately. New sensor hopefully will fix the issue.
|
#16
|
|||
|
|||
Looking closer I think bypass is already fitted, and vibration isn't unbearable yet so new mounts can wait.
|
Thread Tools | |
Display Modes | |
|
|