Singhs RNS-E Install
Just ordered mine, an A6 unit from Lithuania. V. excited.
|
I was about to order this adaptor from Kufatec, but it doesn't list the D2. Which model did you select Ian?
http://www.kufatec.de/shop/product_i...nlock-key.html Another question (sorry) If I order this http://www.kufatec.de/shop/product_i...-to-RNS-E.html Does that mean that the RNS E will use my existing GPS aerial so I could in theory just chuck the free one they supply with the RNS E away..? Thanks |
Quote:
|
Quote:
2) Yes, that will plug the RNS-D type sat nav aerial straight into the back of the RNS-E, so you wont need the aerial that they supply... |
Quote:
Another quick queston, I don't currently have a phone in my car but will be adding bluetooth, do I need to choose the phone option when I am ordering the adaptor. I would think not but just want to make sure. +++ |
Singhs RNS-E Install
Quote:
http://i665.photobucket.com/albums/v...NSEUPGRADE.jpg And seeing as Ian's worked and fit fine the first thing I did was snap the side lugs off, I couldn't find my hacksaw :rolleyes: I tried a test fit, can't install yet as I'm still waiting on adaptors from kufatec but the two sides are a little to wide for it to just slot right in, which leaves a tiny bit of the RNS E sticking out. Close, but not quite. My question is, if I take the wood trim of the centra fascia, pop the RNS E in will the wood just slot on over it? Also, how do I get a power source to it to test it? I don't have my adaptors from kufatec yet and dying to power it on. Which connector is for power? I noticed Ian had it working out the car, in his home? Thanks :D |
(I created your own thread so as not to confuse mine for anyone that is trying to follow it step by step)
In answer to your question re power, I dont know very easily.... I had it rigged up in the house off a 12V supply, but I was using a normal ISO connection into my Kufantec adapter, which then went into the RNS-E. I didnt pay any real attention to which pin it was, and the adapter is now in the car, which is outside, and its cold, and late. Sorry :) |
Cool, thanks for my own thread, sorry for taking yours over. I was contemplating starting it myself but wasn't sure.
I will have to keep this updated now! About the fitment, if I remove the middle wood section and put the RNS E in, will the wood trim fit over it? As when I tried putting the RNS E in I found out the edges are a little are too wide, if not then I will have to sand them down? |
To answer my above question with a quick test fit, it seems the sides need a little sanding down as the wood otherwise doesn't sit flush. Here's some pics from my test install.
http://i665.photobucket.com/albums/v...rS8/photo7.jpg http://i665.photobucket.com/albums/v...rS8/photo8.jpg BTW, my god I cannot tell you how I detest my wood trim. I'm only really fully happy with the car at night when I can't see it. Just need the company doing my piano set to hurry up! |
Hmmm. Interesting. It will be interesting to see if mine fits on still when its all bolted up, I guess it wont if yours doesnt....
Never mind, a little trim it will have to be then... :D |
All times are GMT. The time now is 10:40 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.