|
|
|||||||
| D2 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc. |
 |
|
|
Thread Tools | Display Modes |
|
#1
28th March 2014, 08:28 AM
|
||||
|
||||
Replacing rear anti roll bar bushes
Hello everyone!
During MOT today my rear anti roll bar bushes were diagnosed as 'a bit dry', so will be changing them. Is this DIY job? Will also need new 'bolts', 'nuts' and 'brackets' (if there are any) involved into operation of replacing the bushes. What parts shall I buy with the bushes to do the job? Thanks.
__________________
I'd rather drive on left 
|
|
#2
28th March 2014, 01:22 PM
|
||||
|
||||
|
Good question, MRC are installing mine and I only ordered the bushes. Maybe they will order any extra bits for me.
By the way I had to order the very expensive arms that go along with the anti roll bar, because stupidly my S8 has the 17mm bar with non-sport suspension, and I'm replacing with 20mm S8 bar which needs different arms. Last edited by Goran; 28th March 2014 at 01:38 PM.
|
|
|
|
Linear Mode
