tronic problems
 

has anyone the idea about the tronic problems ?
my tronic in my audi a8 d2 dosent respond to the manual tronic comands,
and the displat in the instrument panel dosent apear
D 1 2 3 4 5

Have you had the fault codes read?

Sounds like the tiptronic gear box isn't getting the message that you want to change from auto to manual from the gear selector so I would look at that first.
If the shifter picked up the change to manual when you move it to the side then the display would be changing to show manual gears.

nothing happend when i move the shifter to the tronic position
the problem must be in transmission electronic module or in shift contacts?can u explain to me?
as i told up the screen of transmission dosent apear in panel

cerips no i have not
where can i find or read this codes ?

What year and engine size is your A8?
There are 4 parts it could be I guess -

The gear lever selector itself
http://forum.a8parts.co.uk/attachmen...1&d=1344224369

The Harness for the selector lever (Item 1)
http://forum.a8parts.co.uk/attachmen...1&d=1344224900

The gearbox ECU itself (item 1 on the pic below)
http://forum.a8parts.co.uk/attachmen...1&d=1344224369

or possibly the F125 switch (item 7 on the pic below)
http://forum.a8parts.co.uk/attachmen...1&d=1344224369

http://forum.a8parts.co.uk/attachmen...1&d=1344224369

The F125 switch is something known to fail more often, but you would be best advised to plug in a diagnostic cable and this may well point you in the direction of the faulty item

my AUDI is V8 4200 cc year 1995

architex can u give me aspecific answer

Get a garage with a diagnostic machine to read the error codes to diagnose what the problem is.

I was as specific as I can be in my answer above, unless there are any differences with a Pre Facelift model then its still scan first to see if any codes come up then look for one of the 4 issues in mentioned/listed +++

is any posibility to scan without using mechanical
pc ?

There are aftermarket standalone units but they mostly do engine only or you can get old dealer VAS5051 but they are costly. Best option is to buy PC cable and use it with PC/laptop. I mean you have PC to post on forum, just buy VCDS interface cable, you can get them on e-bay for less the £7 http://www.ebay.co.uk/itm/VAG-GROUP-...ht_4444wt_1163, where is the problem?

ainarssems
and the softwere where can i find .if i find soft i must diagnose it by myself

Usually you get VCDS software with the cable or you can download shareware version here: http://www.ross-tech.com/vcds-lite/download/index.html or You can use VWTool software which I can e-mail if required. Once you get fault codes from car it should give more clues about fault.

ok send it to me via email @ elvisbuli@hotmail.com

Also have a look at this it will help you to understand how it works and also give you ideas how to use FWD only. Sorry it's German but al least you can check pictures and diagrams. It's for 4-speed gearbox and I think yours being 1995 is probably 4-speed but even if is 5 speed principle is the same.

email to you came back as undeliverable so here is VWTool

ainarssems thnx for the material but it couldnt be open
it looks like an error file
it was a .exe but must be a degaged file

@;ainarssems
finally i opened the material but the difference is thet the transmission here is notlike mine
my transmission is a tiptronic yonger than this in document

hi
 

Architex_mA8tey
i think tha my problem of tronic is the transmission compiuter because and the signs of transmission report in panel do not apear

Could be f125 switch, wiring or instrument panel as well, it's all just guesswork without scanning for fault codes

Yea I wish I had it that easy :P

ok i willl try to replace it but maybe too much work for replacing it

To replace the switch? How too much work?