A8 Parts Forum

A8 Parts Forum (https://forum.a8parts.co.uk/index.php)
-   D2 - Body and Exterior (https://forum.a8parts.co.uk/forumdisplay.php?f=22)
-   -   Sunroof stuck Tilt mode...... (https://forum.a8parts.co.uk/showthread.php?t=6412)

SilverS8 7th May 2013 02:26 PM

Sunroof stuck Tilt mode......
 
Driving home in the sun with tilted up, due to the nice weather i figured i'd open it all the way.. Nope, wouldn't open.. Just tilt's downwards about 1 cm and goes back to max tilt mode..

Tried ignotion off and on but no help. No help with the comfort-locking either..


Any ideas? :)

PsYcHe 7th May 2013 03:58 PM

Not good... but I'm pretty sure you can pop the cover off and close it manually with an allen key

Amanda 7th May 2013 04:13 PM

Isn't there a special tool hidden in the roof somewhere to close the sunroof.

RanjS8 7th May 2013 04:57 PM

Sunroof motor
 
Sounds like either the sunroof mechanism is really stiff and the sunroof motor has stopped working properly.....the sunroof motor covers just pop off with careful levering and then there are 3 screws to drop the motor....leave the motor connected to power and check it still turns....or if it has broken.....

But before doing that check to see if any fuses have blown....where the spindle from the sunroof motor sits ....you might be able to turn the mechanism to close the sunroof with a large flat blade perhaps....and I would try to get some wd40 on the mechanism

SilverS8 7th May 2013 08:36 PM

Thanks for all the replies:)

I did close it manually with the tool hidden in the fusebox cover, Its very smooth and opens easily in all ditections when done manually...
When ignition on it moves apx 1 cm back and forth before it stops, this happens if it is on tilt,half open, fully open...

Is there anyway to calibrate/reset the sensors like on the windows?:)

The_Laird 8th May 2013 07:33 AM

No idea what this is, hope you get it sorted soon.

Could you post a photo of the tool and its location?

Dezzy 8th May 2013 08:28 AM

1 Attachment(s)
Quote:

Originally Posted by SilverS8 (Post 57113)
Thanks for all the replies:)

I did close it manually with the tool hidden in the fusebox cover, Its very smooth and opens easily in all ditections when done manually...
When ignition on it moves apx 1 cm back and forth before it stops, this happens if it is on tilt,half open, fully open...

Is there anyway to calibrate/reset the sensors like on the windows?:)

It could be the pinch protection playing up maybe.

Quote:

Originally Posted by The_Laird (Post 57141)
No idea what this is, hope you get it sorted soon.

Could you post a photo of the tool and its location?

Jim do you not have a owners book? The tool looks like this

http://forum.a8parts.co.uk/attachmen...1&d=1368001489

And on a PF it's stowed inside the cover for the sunroof, int light lens off, 2 off phillips screws out and down comes the cover with a pull.

SilverS8 13th May 2013 04:05 PM

Guess it must have been a vacationing gremlin of some sort..
Works like a charm (for) now :)

Jan


All times are GMT. The time now is 03:32 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.