Quote:
Originally Posted by HPsauce
Just a minor point on removal/replacement.
The tool you use is turned 180 degrees between removal and installation mode, hopefully not a huge change in angle but how much will depend on the design of the tool you have. I had a bit of a struggle to get it onto one of the clips for removal.
So, when you put it back together just decide carefully where to place the clip so that it's easy to get at for both jobs.
IIRC I removed the side pipe first then had to bend and twist a fair bit to get at the one underneath.
|
I've looked where they are. Tool was just from ebay so hope its up to the job
The one underneath did look like a bit of a faff!