A8 Parts Forum  

Go Back   A8 Parts Forum > General Natter > Daily banter

Daily banter For everything, and anything that doesnt fit in elsewhere

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 26th July 2021, 09:08 PM
MikkiJayne MikkiJayne is offline
Senior Member
 
Join Date: Jan 2012
Posts: 5,017
Default

Cats, but yes

200 is probably about right for this one since its in pretty nice condition apart from the leaks and the horrid car dealer lacquer, and it has all come apart reasonably well.

I started taking it apart in the middle of last week. First job - disconnect the steering column from the rack before it goes on the lift



Once it was on the lift I moved on to removing the suspension and discovered the brake pad warning cables have been cut and bypassed



The pinch bolts and tie rods came out without a fight, which was nice



Saturday now. Engine removal, starting from underneath. I mentioned that the heat shield bolt on the driver's side was snapped off - the passenger side bolt has been gorilla'd as well and I can't get it off. The heat shield was already broken on one side so I just snapped it off. More on this mess later.





The power steering fluid is pretty grim, which is weird considering how much it was leaking. I'd put half a litre in it just moving it around the place. This will all get cleaned and replaced though.



Front panel off. Its filthy in here.



The stubborn-pulley-getter-offer tool



Ta dah!



Magnets on the fuel lines



Ohhh dear....







Ready to come out



Coming out



Out



The grottiest engine bay I've encountered so far I think





Drivetrain on the pallet truck ready for disassembly



When the gearbox was done the cam position sensor was refitted with the cable sitting on the exhaust manifold instead of behind the heat shield! How it was still running is a mystery.



I don't have mounting brackets to fit the 32V for the splitting machine so I just supported the engine with the crane and rolled the gearbox off the back of it



Home-made crank locking tool I loosened the crank pulley bolt before putting it on the stand, since these things are so tight that with the engine on the stand I can't put enough torque on it to loosen the bolt without the stand falling over!



Separated



Engine on the stand ready for stripping and cleaning

Attached Thumbnails
Click image for larger version

Name:	030.jpg
Views:	1123
Size:	84.4 KB
ID:	26796   Click image for larger version

Name:	031.jpg
Views:	1125
Size:	75.9 KB
ID:	26797   Click image for larger version

Name:	032.jpg
Views:	1118
Size:	73.4 KB
ID:	26798   Click image for larger version

Name:	033.jpg
Views:	1114
Size:	94.0 KB
ID:	26799   Click image for larger version

Name:	034.jpg
Views:	1122
Size:	64.0 KB
ID:	26800   Click image for larger version

Name:	035.jpg
Views:	1106
Size:	49.5 KB
ID:	26801   Click image for larger version

Name:	036.jpg
Views:	1097
Size:	104.2 KB
ID:	26802   Click image for larger version

Name:	037.jpg
Views:	1102
Size:	95.6 KB
ID:	26803   Click image for larger version

Name:	038.jpg
Views:	1086
Size:	90.5 KB
ID:	26804   Click image for larger version

Name:	039.jpg
Views:	1340
Size:	75.3 KB
ID:	26805  

Click image for larger version

Name:	040.jpg
Views:	1086
Size:	63.7 KB
ID:	26806   Click image for larger version

Name:	041.jpg
Views:	1075
Size:	54.4 KB
ID:	26807   Click image for larger version

Name:	042.jpg
Views:	1096
Size:	128.2 KB
ID:	26808   Click image for larger version

Name:	043.jpg
Views:	1096
Size:	113.8 KB
ID:	26809   Click image for larger version

Name:	044.jpg
Views:	1080
Size:	108.0 KB
ID:	26810   Click image for larger version

Name:	045.jpg
Views:	1066
Size:	83.9 KB
ID:	26811   Click image for larger version

Name:	046.jpg
Views:	1069
Size:	83.2 KB
ID:	26812   Click image for larger version

Name:	047.jpg
Views:	1082
Size:	101.7 KB
ID:	26813   Click image for larger version

Name:	048.jpg
Views:	1296
Size:	66.0 KB
ID:	26814   Click image for larger version

Name:	049.jpg
Views:	1055
Size:	114.4 KB
ID:	26815  

Click image for larger version

Name:	050.jpg
Views:	1044
Size:	94.2 KB
ID:	26816   Click image for larger version

Name:	051.jpg
Views:	1034
Size:	114.6 KB
ID:	26817   Click image for larger version

Name:	052.jpg
Views:	1028
Size:	112.8 KB
ID:	26818  
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:07 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.