Mmi 2g update - optic loop?

[JulianHicks]

Originally Posted by Echo

I'm just concerned about the Nav though. Why didn't it update with the other stuff? Anyone got an answer for that one?

Very pleased that the update to 5570 went well, but a bit miffed at the Nav bit.

Sorry; only just read this today. [I've got a D4 now].

The answer's simple although probably already deduced

The Navigation firmware is on the Navigation DVD and not on the MMI update CDs. If you swap an old DVD back in the Navigation drive and run a VCDS, you'll see the firmware level of the unit is backleveled ...

Julian

Old mechanism:

Address 37: Navigation Labels: 4E0-910-88x-37.lbl
Part No SW: 4E0 910 887 D HW: 4E0 919 887 C
Component: MNS ECE H43 0550 [Firmware level]
Revision: 00000000 Serial number: 353EJ047522731
Shop #: WSC 02313 785 00200
VCID: 2E05097BDC17BBEBD1E-807A

No fault code found.

New mechanism:

Address 37: Navigation Labels: 4E0-910-88x-37.lbl
Part No SW: 4E0 910 888 P HW: 4E0 919 887 C
Component: MNS ECE H43 1060 [Firmware Level]
Revision: 00000000 Serial number: 353EJ047522731
Shop #: WSC 02313 785 00200
VCID: 3B23302F1F655E439A1-806E

No fault code found.