20th February 2016, 05:06 PM
|
|
Senior Member
|
|
Join Date: Feb 2016
Location: london
Posts: 866
|
|
Quote:
Originally Posted by limoncello
did it on mine, you need to remove the wheels, remove the wheel arch lining and you will see 2 or 3 bolts that keep the bumper on, loosen them off until the bumper pulls forward enough to get your hand in , best to have a new sensor standing by, but often the wires just become loose, i plugged it back in firmly and taped it a bit, no problems since. be careful with the washer bits and pieces
|
hi mate did you undo the 5 screws on the top also? was planning to do this today but heavens opened so gave it miss:roll eyes:it seems my under tray is missing! 
|
Threaded Mode