WITW - Barn-find Final Edition

[MikkiJayne]

Right, back on this (again) after a bit of a wait for powdercoating due to a backlog and continued difficulty sourcing parts.



Cleaned up in here



I popped the oil pump screen off just to check there were no bits of chain tensioner stuck in it - one tiny piece so thats fine.



Sealant round the flange



Sump back on. I put new bolts on this time since the old ones are properly crusty. The sump looks a bit crunchy in this pic because of the light - actually its just some surface pitting where the rust was blasted off.



Metal oil cooler pipe



One day I will manage to stick a sump on without catching the sealant before it sets. That day is not today



Replaced the oil pressure sensor as a precaution



The old thermostat housing was such a mess I just replaced it with a good one.



Put to bed for the evening since the cam covers are off.



Cam chain tensioners tomorrow