![]() |
|
D3 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Hello,
I have another Parking Brake Malfunction. Same code as snapdragon had at the beginning. Code:
Address 53: Parking Brake Labels: 4E0-910-801.clb Part No SW: 4E0 910 801 A HW: 4E0 907 801 Component: EPB AV1C1010 H01 1010 Revision: AV1C1010 Coding: 0000331 Shop #: WSC 00656 210 88563 VCID: 1D3B9B93C43580D675-8048 1 Fault Found: 02432 - Supply Voltage for Left Parking Brake Motor (V282) 012 - Electrical Fault in Circuit - MIL ON Freeze Frame: Fault Status: 11111100 Fault Priority: 1 Fault Frequency: 16 Reset counter: 103 Mileage: 233128 km Time Indication: 0 Date: 2003.03.05 Time: 07:00:35 - Both 30A fuses near by battery are OK. - I bought a new motor to the left side but that didn't help at all. Also tried to install motors to the different sides but still problem stays at the left side. Just wanted to make sure a new motor is not broken already. - I measured with a multimeter a whole wire from motor to control unit and its OK. - I bought an used control unit with part number SW 4E0 910 801 D and installed it today but still, same fault code. I have not changed a caliper, but it doesn't make sense to me how it would make any difference in this case, when fault code says "Electrical Fault in Circuit"? Does anyone have any idea how to test further? Is there any tricks what i should try with VCDS? I haven't found any relays or fuses to the EPB except those two 30A in luggage? Thanks. |
![]() |
|
|