![]() |
|
D2 - Interior Electrics Airbags, Sensors, climate modules, instrument clusters, switches etc |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
The adaptor should be totally passive, so if you have nothing plugged into it then it's faulty
![]() |
#2
|
|||
|
|||
![]()
thanks guys.....some research shows that if you don't remove the adaptor carefully and fully they can get out of line....to the extent that there exists a small tool to re-align them
think I will just get a new one as suggested! |
#3
|
|||
|
|||
![]()
They are inexpensive so fingers crossed that solves the issue. I have changed my trailers over to 13 pin now, only takes 10 minutes to change the plug and it makes life slightly easier (and neater)!
![]() |
#4
|
|||
|
|||
![]()
well , new adaptor arrived at the vast cost of €5
problem cured ! the old one must have been twisted out of line on removal |
#5
|
|||
|
|||
![]()
Fiver well spent
![]() |
![]() |
|
|