The bumper comes off, you screw in special pins in bumper shock absorber bolt places and the whole front panel with radiators moves about 3-4 inches to allow better access to front of engine.
On the D2 I would say it's possible as I have done cambelts several times without moving it in service position. On 2.5tdi A6 C5 it's too tight so it needs to go in service position but I have done it so many times it's very easy and not really an issue now but first time was a bit intimidating. I do not have the special pins so I just used bumper bolts with some 12 or 15 mm plumbing copper tube over them.
On D3 looking at my 4.2TDI I wod say it needs to go in service position but I have not looked at petrol 4.2 in detail so cannot comment.
__________________
Currently 8less
2011 Q7 S Line 3.0TDI, 2016 Tesla Model S 90D
8 history:
2006 A8 Sport 4.2TDI quattro SOLD,
1997 S8, reached end of life with gearbox failure
Last edited by ainarssems; 21st August 2021 at 07:30 PM.
|
21st August 2021, 07:26 PM
Hybrid Mode
