26th August 2024, 09:31 AM
|
 |
Senior Member
|
|
Join Date: Jun 2013
Location: Londonderry, Northern Ireland
Posts: 3,230
|
|
Quote:
Originally Posted by Marty
This post was some time ago, what diameter copper and fittings would I need to replicate this? thanks
|
They're pretty much a standard size for all cars, and any decent motor factors should have the parts in stock. If you plan to make them up yourself, you can get a flare kit similar to the following one (but get a decent brand):
https://www.amazon.co.uk/dp/B0B9BKVLFC
The pipe is 10mm and this is an example of the end pieces needed (again, get from a motor factor if possible:
https://www.amazon.co.uk/Thinp-Piece.../dp/B0BL3FLV7D
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts
My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts
Sold!  2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights
My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
|
Hybrid Mode
