|
|
|||||||
| D3 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
22nd June 2011, 09:23 PM
|
||||
|
||||
If you cycle the handbrake (as you should do) you shouldn't need to enter a value. But the thickness is of 1 pad.
__________________
 07 Silver D3 A/S8L Quattro  S8 front end, Xenons, Bose, Bluetooth, Voice Control, Autodim mirrors, Heated folding mirrors, Double Glazed Windows, Electric Rear & Side Blinds, Black leather Comfort Seats with front memory seats & mirrors, Front & rear heated seats, Interior/Exterior light pack, TV.I.M, AMI, Parking sensors Front & Rear, Air suspension (soon to be lowered), Keyless entry & Start/Stop, 4 zone climate control, Power Boot Open/Close.
|
|
#3
23rd June 2011, 12:48 PM
|
||||
|
||||
|
Quote:
__________________
07 Silver D3 A/S8L Quattro S8 front end, Xenons, Bose, Bluetooth, Voice Control, Autodim mirrors, Heated folding mirrors, Double Glazed Windows, Electric Rear & Side Blinds, Black leather Comfort Seats with front memory seats & mirrors, Front & rear heated seats, Interior/Exterior light pack, TV.I.M, AMI, Parking sensors Front & Rear, Air suspension (soon to be lowered), Keyless entry & Start/Stop, 4 zone climate control, Power Boot Open/Close.
|
|
#4
30th January 2012, 09:21 PM
|
||||
|
||||
|
Sorry to drag up an old thread but better this than starting a new one on the same subject.
When putting in the pad thickness am I correct in thinking it is the thickness of the Ferodo material that is entered and not the material and the metal backing
|
|
#7
31st January 2012, 08:01 AM
|
|||
|
|||
|
I would be interested in your measurement, mine were 12mm, genuine Audi pads, which seemed a bit low for new ones.
The range you can enter is 10-23mm. I think these measurements are needed for calculating when the wear sensor comes on. Last edited by snapdragon; 31st January 2012 at 08:18 AM.
|
|
|
|
Though other brake pads are available
Hybrid Mode
