Retro fit Reverse camera

[daviesbike]

yes i went into set up and changed a few thing and i also went from pal to ntsc and back again to see if that worked but nothing, i think the video lead must be faulty because the audio input works fine and its the same procedure to fit the video cable,

i dont understand. its not snow its like white screen with a load of lines in it almost like a bad earth or some thing but i have checked every thing and changed it into av2 instead and its just the same, no matter what i do

i have tryed phoning the company but no answer so i will have to wait till tuesday now,

[limoncello]

mine did something similar, drove me mad, but started working after i played with the setup

you could try rebooting the mmi, and trying a different input device

[daviesbike]

i tried a DVD player and it was still the same and i have left it for a while thinking that when i come back to it it will work but nothing, have not yet re-booted the MMI what do you hold down to do that i cant remember ?

[limoncello]

press TEL, BIG KNOB and the top right soft button together

[PsYcHe]

Take all 3 conectors out, and put one of the audio ones into the video connectors, that'll tell you if it's broken at the cable end or the tuner end.

[roboblob]

Originally Posted by limoncello

press TEL, BIG KNOB and the top right soft button together

Ok I miss read that a few times ,so its TEL not THE got it

[Architex_mA8tey]

Originally Posted by roboblob

Ok I miss read that a few times ,so its TEL not THE got it

Ooooh Matronnnn!!!

[limoncello]

Originally Posted by Architex_mA8tey

Ooooh Matronnnn!!!

so you mean ooooooh matron, got it