Glovebox light not working

[wiingg]

Originally Posted by sloss

Using a Mulitmeter set to the beeper alarm just touch each visible end of the fuse while it's in position, it should beep: no beep = duff fuse/connection.

Don't hold it on for long as, depending on type of meter, you may complete the circuit and have current going through the meter.

As you are checking a small part within a circuit there will be no shorting or problem caused elsewhere

I've tested all the fuses and they all had continuity across them. I checked for wiring diagrams in elsawin but couldn't find anything.

Has anyone got any wiring diagrams associated with the glovebox light wiring?

[sloss]

Something just occurred to me so I went out to my car to check....

You need at least the side lights on before the Glovebox one will work

[wiingg]

Originally Posted by sloss

Something just occurred to me so I went out to my car to check....

You need at least the side lights on before the Glovebox one will work

That's that one sorted then!! I just assumed it would work all the time as did the one in my previous car